If you're tired of curling your lashes every day and want a more long-lasting solution, learning how to do a lash lift at home is a perfect option. This method is simple, cost-effective, and gives beautifully curled lashes that can last for 6–8 weeks.
In this step-by-step guide, we’ll show you exactly how to do a lash lift at home using the Z20 Lash Lift Kit, which contains all the essential tools and solutions you need for professional-level results.
Before you start, it’s a good idea to familiarize yourself with each step, take a “before” photo, and perform a patch test to ensure a safe and satisfying lash lift experience.
Tips Before You Start
Doing a lash lift at home is convenient, cost-effective, and gives you full control over the process. You can enjoy beautifully curled lashes without daily use of an eyelash curler or frequent salon visits.
Tips Before You Start:
- Familiarize Yourself: Read through all steps and instructions carefully before beginning. Knowing the sequence will help your process go smoothly.
- Patch Test: Always perform a patch test 24 hours before starting to check for any allergic reactions.
- Take a “Before” Photo: Capture your natural lashes before the lift. This not only helps you see the difference afterward but also allows you to track your results over time.
- Prepare Your Space: Make sure you have good lighting, a clean surface, and all your tools ready.
With these tips in mind, you’ll be ready for a safe and effective at-home lash lift experience.
What You’ll Need:
For a complete lash lift, we recommend using the Z20 Lash Lift Kit, which includes all the essential tools and solutions for the perfect lift:
Lash Lift Kit (Z20):
- 3 Y-shaped lash brushes
- 5 lash eyelashes brushes
- 10 cleansing cotton swabs
- 5 pairs of lash lift shields
- 1 small spoon
-
1 instruction manual
Step-by-Step Process:
Step 1: Clean Your Hands and Eyelashes Thoroughly
Start by washing your hands thoroughly with soap and water. Dry them with a clean towel to avoid introducing any bacteria to the eye area.
Remove your contact lenses before starting the process. This ensures there are no obstructions during the lash lift.
Make sure your lashes are free from makeup, oils, or debris that could interfere with the lift. Use a gentle cleansing water or foam to wipe the area around your eyes with a cotton pad. Pay special attention to any mascara or eye makeup, as these residues can prevent the lifting solutions from adhering properly.
Tip: Use a cotton swab to clean each individual lash. Ensure that you go from the root to the tip of each lash to ensure the cleanest surface possible for the solutions to work effectively.
Step 2: Select the Right Lash Shields
Choosing the right lash lift shield size is crucial to getting the best curl. Assess the length, thickness, and condition of your lashes, as well as your eye shape, to select the most suitable size.
Image: Have you considered a quick guide for selecting lash lift shield sizes?
-
If your eyelids droop or are hooded: A larger lash lift shield will lift your lashes away from the lid, preventing them from touching your skin.
-
For shorter or sparse lashes: Use a medium-sized shield to ensure the lashes don’t curl too much, which could make them look shorter.
Test Fit: Place the lash lift shield on your eyelid and check the fit. The shield should sit just above your natural lash line, and the lashes should lay comfortably on top of the shield without pressure. Adjust the shield size if necessary.
Step 3: Apply Eye Pads and Secure Lower Lashes
To prevent the lifting solutions from getting on your lower lashes or eye area, you need to secure them with eye pads or sensitive tape. This also prevents the bottom lashes from sticking to the upper lashes.
-
Gently apply the eye pads under your eyes, making sure they don’t cover too much of the lower lash line. If the pads cover too much, trim them to fit.
-
If you have hooded eyelids or thick skin, use tape to lift the eyelids slightly. This helps ensure that your lashes are fully visible and gives them a cleaner lift.
Step 4: Attach the Lash Shield and Apply Adhesive
Apply a thin layer of lash lift adhesive to the back of the lash lift shield. Position the shield on the eyelid with the middle aligned to your eye’s natural crease. Gently wiggle the shield for a better fit and trim if it touches the inner corner.
Tip: Slightly lift the eyelid to see the lash roots. First fix the inner corner, then attach the lashes in small sections. Apply a thin, even layer of adhesive on the shield in sections (inner, middle, outer) and wait 10–15 seconds for it to become tacky.
Use your fingers to press and hold the shield while combing lashes upward, making sure lashes do not cross or overlap. Adjust any misaligned lashes with a damp cotton swab.
Key Reminder: Ensure lashes are aligned and fully adhere to the shield curve for a uniform, clean lift.
Step 5: Apply the Lifting Solution (Step 1 – Softener)
Using a cotton swab, apply Solution 1 starting from the outer corner of the eye and slowly moving toward the inner corner. Outer lashes are usually thicker and stronger, helping to achieve a more even lift. Spread the solution evenly from the lash roots to the mid-length, avoiding the tips to prevent over-processing. Follow the timing recommended in the instruction manual.
Tips for better results at home:
- Work in sections if necessary, ensuring each lash is coated.
- Consider factors that can affect softening time: solution strength, lash health, thickness, room temperature (ideally 20–25°C), season (lashes may be drier in winter), and exposure to air. Covering with plastic wrap can help control oxidation if needed.
- Observe the lashes during the process; if some lashes react faster or slower, adjust timing slightly.
Timing for Z20:
- For fine lashes: 8-10 minutes
- For normal lashes: 10-12 minutes
- For thick lashes: 12-14 minutes
Tip: Use a timer to track the time for each solution to ensure you don’t leave the solution on too long, which can affect the results.
Step 6: Check the Softening Progress
After the recommended time, gently lift a lash from the shield using tweezers. Hold the tip lightly and try bending it forward.
- If the lash feels stiff and resists bending, leave the solution on for 1–2 more minutes.
- If the lash bends easily and forms a soft curve, the softening is done and you can move to the next step.
Step 7: Remove the Softener
Use a cotton swab to remove the softener solution by gently wiping from root to tip. Make sure you don’t disturb the shape of the lashes, keeping them in place on the shield.
Step 8: Apply the Setting Solution (Step 2 – Fixative)
Apply Solution 2 (the fixative) over the lashes, focusing from the roots to the mid-length. Avoid applying it to the lash tips.
Allow the fixative to sit for 5-10 minutes, depending on the lash thickness and the solution strength. This step locks the curl in place and sets the shape.
Tip: Apply only a thin layer of the solution—this is sufficient. Make sure every lash from root to mid-length is evenly covered.
Step 9: Check the Setting Results
After the recommended time, gently tap the lashes with tweezers to test the curl. If they spring back into a beautiful, stable curve, the setting process is complete. If not, leave the solution on for an additional minute or two.
Then, use a cotton swab to gently wipe off any excess 2nd solution from the lash tips and surrounding skin to prevent irritation and ensure the lashes aren’t overloaded.
Step 10: Apply the Nourishing Solution (Step 3 – Moisturizer)
Apply Solution 3 (the nourishing solution) to condition your lashes and keep them healthy. Let the solution sit for 3-5 minutes. This step also removes any remaining adhesive.
Step 11: Clean the Area
Carefully remove the eye pads and any residual product from the eye area using a cotton swab or pad with the cleansing solution.
Step 12: Separate and Final Touches
Use a clean lash brush to comb through your lashes, separating them for a perfectly groomed look.
Step 13: Remove Excess Moisturizer
Use two cotton swabs or a lip brush to gently pinch and remove excess Solution 3. A small amount should remain to give the lashes a subtle shine.
Step 14: Remove the Lash Shield
Place your index finger on the center of the eyelid and gently peel the shield from outer to inner corner. You can use a cotton swab dipped in Solution 4 to help dissolve any remaining adhesive. If the shield still feels sticky against the skin, peel slowly and let it come off naturally. Clean the surrounding skin with a cotton pad and Solution 4 until dry.
Step 15: Final Separation
After removing the shield, use a lash brush to separate the lashes. Your lash lift is complete.
Quick Takeaways:
-
Cleanliness is Key: Ensure your lashes are free of makeup, oils, and debris before starting the lift.
-
Eyelash Lift Shield Selection: Choose the right size lash lift shield based on your lash length and eye shape.
-
Timing is Critical: Stick to the recommended times for each product to avoid under or over-processing your lashes.
-
Post-Care: Give your lashes 24-48 hours to set without water or makeup to maintain the lift.
-
Consistency Matters: Practice makes perfect—your first lash lift may take longer, but once you get the hang of it, future lifts will be quicker and easier.
FAQ:
-
Can I do a lash lift if I have sensitive eyes?
Yes, you can, but it’s important to choose lash lift and tint that are formulated for sensitive skin. Be sure to patch-test the products on a small area before applying them to your eyes. -
How long will my lash lift last?
A lash lift typically lasts between 6-8 weeks, depending on your natural lash growth cycle. Regular aftercare can help extend the lifespan of the lift. -
Can I wear mascara after a lash lift?
Yes, but it’s best to wait for at least 24 hours before applying mascara to allow the lift to fully set. -
What should I do if I accidentally get the lifting solution in my eyes?
Immediately flush your eyes with water or saline solution to rinse out any product. If irritation continues, seek medical attention. -
How often can I do a lash lift?
You should wait at least 6 weeks before performing another lash lift to avoid over-processing your lashes. -
What happens if the lash lift solution is left on for too long?
Leaving the solution on too long can lead to over-processing, resulting in damaged lashes or uneven curling. Always follow the timing guidelines for the best results. -
How long does a lash lift and tint take?
A standard lash lift usually takes about 19-31 minutes. Timing may vary depending on lash length, thickness, and experience level. -
How long after a lash lift can I shower?
It’s recommended to avoid water, steam, or sweat around the eyes for at least 24-48 hours after the lash lift. This ensures the curls set properly and last longer.
Conclusion:
A lash lift is an excellent way to enhance your natural lashes, giving them an elegant, lifted appearance that lasts for weeks. By following the detailed steps in this guide and using Gollee’s Z20 Lash Lift Kit, you can achieve professional-level results right at home—complete with all the tools and solutions you need in one convenient set.
Remember, the key to a successful lash lift is preparation, patience, and attention to detail. With Gollee products, you can be confident that your lashes remain beautifully curled, safe, and nourished, without the hassle of daily curling or frequent salon visits.
