Search
Close this search box.

Maintaining The Cleanliness Of The Eyelash Adhesive Nozzle. What, Why, And Everything Else You Should Know

GOLLEE Pro Eyelash Extension

An adhesive for eyelash extensions. These three somewhat insignificant but extremely potent words are what determine whether or not a pair of lashes will be retained.

The worst thing that can happen to a lash extension practitioner is for their adhesive container to become blocked. Not only is it annoying to try to unclog it, but the vast majority of the time it is such a hassle that we just toss it out since it is not worth the trouble. When you are just starting out as a lash artist, this might be a problem because you are wasting product that has already cost you money. Think about it: if you have to throw away one clogged bottle per month, the total cost will undoubtedly be significant.

Have you ever experienced the nozzle of your adhesive getting stuck to the lid? Or the adhesive might have leaked out of the nozzle, and you neglected to clean it up. If you are a lash artist, you have almost certainly suffered from headaches brought on by the adhesive nozzle that is attached to the lid.

The situation can now be salvaged thanks to adhesive wipes! After you have dispensed your glue, you can easily clean the nozzle by using a wipe. It is as simple as that. If you maintain the nozzle clean, you won’t have to worry about it being clogged or sticking to the lid. You might be wondering, well, why not just wipe it with a Kleenex or a piece of paper towel? These are stuffed to the brim with lint and cotton. When combined with the glue, the cotton causes the production of heat. There are a variety of things that can produce lint, to which your eyelashes are also drawn. It is essential to abstain from using things that produce lint.

You may get a little bit more used out of these adhesive wipes by cutting them in half beforehand. In addition to this, it is recommended that you use the wipes prior to removing your adhesive. Remove the lid from the adhesive before you begin shaking it, and after the lid is removed, fold each wipe into fourths. Make use of that wipe to cover the end of your glue, and then shake it, shake it, shake it. The purpose of this is to prevent the adhesive from getting into the lid cap, which can also cause it to build up and stick your nozzle to the tip of the bottle.

A significant portion of the success of lash extension retention can be attributed to the ԛuality of the glue used for the extensions. As a result, the first thing that any lash extension artist ought to learn how to do in order to manufacture a lash set of superior quality is to exercise extreme caution when handling their glue. Find out how you can make it happen with our help.

There are several elements that can impact the lash extension glue’s ability to work at its optimal ԛuality, but you can avoid this by having solid knowledge of adhesive! The following is an outline of some of the most important advice that may be of assistance to you.

How To Keep An Adhesive Nozzle From Getting Blocked!

Nobody would like to put items in the trash. Especially for a newbie lash extension artist, throwing items in the trash before making complete use of the items could be hurtful. On the other hand, the good news is that this issue can be readily circumvented. What exactly are the many things that we can do to avoid the lash adhesive nozzle from becoming clogged and how can we do these things? Have a look down below.

Storage

It is possible that the manner in which you store your glue is the root cause of its incessant tendency to clog nozzles. Glue for false lashes should be kept in an airtight container at all times, standing erect in the container. A container that is airtight is the best way to maintain a steady temperature and climate for the adhesive. If you want, you can even put some rice in the container to assist absorb any potential moisture. The rice will not only hold it in place, but it can also assist maintain a consistent temperature for the glue while it is being stored. Additionally, it will help absorb any moisture that may be present in the area around the adhesive container.

This comes in especially handy for people who live in locations with a lot of humidity (like Hawaii or Florida). Some lash extension adhesive is designed specifically for use in humid environments, and it actually dries more quickly in conditions of increased humidity.

You will need to make an investment in some adhesive storage if you do mobile work and find yourself frequently traveling from client to client. However, if you work in a lash salon, this piece of advice will come in very handy, and it will provide an excellent method for storing glue throughout the day.

TIP: When looking for an adhesive for lash extensions, be sure you choose one that has been tried out and used in a climate that is comparable to the one you will be using it in.

Depending on the type of glue you have, you might want to keep it in the refrigerator once it has been opened but before it has been used to ensure that it maintains its ԛuality. Make sure you read the directions that the manufacturer has provided on their specific suggestions.

Clogged Nozzles

If the opening at the top of your adhesive container becomes blocked with debris, you will find that it is getting progressively more difficult to dispense the adhesive. Some individuals may attempt to clear a clog in the nozzle by forcing anything down it. And some people would even go so far as to cut their nozzle with a pair of scissors, which is a step that is completely unnecessary.

Under NO circumstances should something be forced down the nozzle. This does little more than force dried adhesive further into the bottle. This will then find its way back into the neck of your bottle the next time you use it, and over time it will become impossible for you to use it, which will result in you having to dispose of it because it is unusable.

Avoid Cotton!

It is imperative that you never bring any cotton fibers or items that contain cotton anywhere near your lash extension adhesive. This is for your own safety. Cotton fibers combined with lash extension adhesive have the potential to cause an exothermic heat reaction. If you put some lash adhesive on a cotton pad or a cotton bud, you might observe that it starts to produce a white smoke after a while. This is a reaction that produces heat (exothermic).

When you use a cotton pad to clean the nozzle of your lash adhesive, there is a good chance that some of the cotton fibers will be left behind. Because of the exothermic process, if this keeps happening, the plastic nozzle may eventually start to melt, and eventually, the bottle’s neck will become so weakened that it will break off. (Not good for company morale)

The Proper Way To Look After Your Eyelash Extension Adhesive

Keeping your lash extension adhesives clean should be one of your top priorities as an eyelash extension artist. If you keep the nozzle of your lash extension adhesive clean and make sure to dispense it in the correct manner, you should be able to use up every last drop of your lash extension adhesive. Here are some tips to help you properly look after your eyelash extension adhesives

1. Take off the top of your adhesive container.

2. Place a lid over the opening, and shake the container vigorously for a few seconds. For best results, use an electronic shaker.

3. Before dispensing your adhesive, make sure to give it a “burp” first!

4. After you have “burped” your bottle, pour a small bit of the liԛuid over a jade stone.

5. Return the bottle to its upright position and “burp” the glue once more to expel any air and adhesive that may be trapped in the bottle’s neck.

6. If there is any glue near the nozzle of the bottle, make sure to remove it as soon as possible using nozzle wipes that do not include lint.

7. Replace the cap on your adhesive, and store it in an airtight container, keeping it out of direct sunlight and away from places where there is an excessive amount of moisture.

What Exactly Are Adhesive Nozzle Wipes, If I May Ask?

Have you ever wondered what you should use to clean the nozzle of your lash extension adhesive bottle? Or how difficult is it to prevent things like dribbles, obstructions, and tissue fibers from accumulating in the nib of your glue bottle? The answer to all your questions is simply called Adhesive Nozzle Wipes.

Investing in some adhesive nozzle wipes is your best bet for maintaining the cleanliness of the nozzle on your lash glue. These wipes will keep your glue nozzle in pristine condition, preventing the glue from hardening and crusting around the nozzle, which would make it difficult or impossible to sԛueeze out. After each drop of glue, clean the nozzle and cap with one of these adhesive wipes to keep the cap from clinging to the nozzle. With the help of this innovative technique, you will be able to clean your lash glue without triggering an allergic reaction or leaving any residue behind.

You have to check that the lash extension adhesive wipes you use do not contain cotton, that they are lint-free, and that they are disposable. This is a very important thing to know before buying your adhesive nozzle wipes.

Do You Need Adhesive Nozzle Wipes?

Now you know exactly what adhesive nozzle wipes are the next question you ask yourself is Do You Really Need It? Your glue nozzle has been clogged as a result of the accumulation of adhesive; is this correct? Lint-free glue nozzle wipes are exactly what you require at this time. These adhesive wipes will assist you in maintaining a clean glue nozzle, which will allow you to take advantage of a number of benefits, including the following:

Better Retention:

Your bottle will never have a leak in its seal. If the nozzle of the glue is unclean, the bottle might not be able to fully close. Better retention due to the airtightness of the bottle, which results in less air and moisture entering the container.

Extended time spent using the bottle of glue:

Are you fed up with the glue cap continually getting caught on the glue nozzle? Using the wipe to clean the nozzle will avoid an incident like this from occurring. When shaking your glue, you must not forget to use the wipe; simply remove the cap, fold the wipe in half, lay it over the nozzle of the glue, press down firmly, and shake for the amount of time that is required. This straightforward method will assist you in preventing the glue from getting into the cap and preventing the cap from being stuck to the glue nozzle.

What Is The Significance Of Adhesive Nozzle Wipes?

Not all lash extension artists will understand the use of adhesive nozzle wipes and how beneficial it helps your lash adhesive last longer. Lint- and cotton-free nozzle wipes are the ideal accessory to have in your lash extension kit. If you want your adhesive nozzle to remain in pristine condition, all you need to do is use one pad to remove any excess glue.

It is crucial to keep the nozzle of your glue clean in order to extend the life of the adhesive. If a nozzle is not kept clean, the excess can build up inside of it, which increases the danger of the nozzle becoming stuck or inoperable.

When you use our adhesive nozzle wipes, you can rest assured that the bottle will retain its airtight seal!

Why You Should Never Attempt to Unclog Or Clean Out the Nozzle of the Lash Adhesive?

You will undoubtedly be aware if the lash extension adhesive bottle becomes obstructed in any way. It will become increasingly challenging to accurately administer the adhesive as time goes on.

Under no circumstances should something be forced down the nozzle. This causes more harm than good. It makes the dried glue be pushed back into the bottle, which may cause your adhesive to become less effective. Additionally, the dry adhesive has a high probability of being stuck within the nozzle once more. Because the dry adhesive piece now has fresher adhesive around it and drying onto it for the second time around, it will be impossible for you to unclog your nozzle again. If something like this happens, you will most likely dispose of the entire bottle.

How To Clean Your Adhesive Nozzle With Adhesive Nozzle Wipes And How To Use Them?

If the lid of your bottle ever has any black residue on it, you will soon be unable to open the bottle. This should never be the case. By adhering to the procedures outlined in this article, you can completely avoid this! Below is a step-by-step guide on how to clean your adhesive with your adhesive nozzle wipes.

Step 1: First, remove the cap from the glue BEFORE you start shaking it.

Step 2: Fold your wipe in half and twist it around the nozzle, then vigorously shake the adhesive while it is on the nozzle with the glue wipe.

Step 3: After using the adhesive, clean the nozzle by holding the bottle upright and puffing it a few times to clean the inside of the nozzle. This should be done while the adhesive is still wet.

Step 4: Clean the exterior of the nozzle with a damp cloth.

Note: You should start using your glue drop as soon as you have placed it on the holder. If there is a significant amount of excess glue on the nozzle, fold it a second time to prevent the glue from going on your fingers.

Conclusion

As was just stated above, no artist in their right mind would want to dispose of their unfinished items in the trash. As an eyelash extension professional, you cannot afford to replace your adhesives every time they become clogged because a clogged glue bottle can do more harm than good, and you do not want to have to replace it. Using adhesive nozzle wipes makes it simple for you to clean your adhesive, which in turn helps your glue last for a longer period of time.

We really hope that you found this blog post to be helpful in your hunt for a solution that will help your adhesives last for a longer period of time.

Get The Latest Updates
No spam, notifications only about new products, updates.

Related Posts

This website uses cookies to ensure you get the best experience on our website. View more
Accept

Get a free sample

Fill out the form below to get a free sample (shipping fee required), and we will contact you within 1 working day, please pay attention to the email with the suffix ‘@gollee.com’.